Baseline for Documents

3. Non-Interference

Accessibility Requirements

1. WCAG Conformance Requirement 5: Non-Interference – The following success criteria apply to all content in the document, including content that is not otherwise relied upon to meet conformance, because failure to meet them could interfere with any use of the content:
   • 1.4.2 - Audio Control,
   • 2.1.2 - No Keyboard Trap,
   • 2.3.1 - Three Flashes or Below Threshold, and
   • 2.2.2 - Pause, Stop, Hide.

Test Method Rationale

The test results for SC’s 1.4.2 (Baseline Test 21.D-AudioControl), 2.1.2 (1.B-NoKeyboardTrap), 2.3.1 (9.A-Flashes), and 2.2.2 (21.B-MovingInfo and 21.C-AutoUpdate) determine the result of this baseline test.

Limitations, Assumptions, or Exceptions

None

3.A Test Procedure for Non-Interference

Baseline Test ID: 3.A-NonInterference

Identify Content

Results of Baseline Tests 21.D-AudioControl, 1.B-NoKeyboardTrap, 9.A-Flashes, 21.B-MovingInfo, and 21.C-AutoUpdate.

Test Instructions

1. Check that all of the test results are pass. [CR5]

Test Results

If any of the above checks fail, then Baseline Requirement 3.A-NonInterference fails.

Advisory: Tips for Streamlined Test Processes

• This test result is a logical AND of the identified SCs. All must pass for this test result to pass.
• A reporting tool may be utilized to generate the result for Conformance Requirement 5.

WCAG 2.2 Techniques

Not Applicable.